Dietsmann Oil and Gas Jobs

Dietsmann is the Leading Independent Specialist of Operation and Maintenance for Oil, Gas, LNG and Power Plants leveraging over 35 years of accumulated know-how of plant and equipment, the evidence of which is its long term partnerships with many IOCs and NOCs. As the largest independent provider of specialized operation and maintenance services, Dietsmann is also the leader in Maintenance Engineering and Inspection.

We are recruiting to fill the following positions in one of our offshore projects:

Job Title: Senior HVAC Engineer
Ref No:
 HVF02
Location: Rivers State
Requirement

  • HVAC centralized and unit system, overhaul and maintenance
  • P&ID’s
  • Physical measurements: Ohm, testa, ampere, farad, volt
  • Process knowledge of oil treatment, gas treatment and heating
  • Report to leader routine spare part needed
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Junior HVAC Technicians
Ref No:
 HVF03
Location: Rivers State
Requirement
s

  • HVAC centralized and unit system, overhaul and maintenance
  • P&ID’s
  • Physical measurements: Ohm, testa, ampere, farad, volt
  • Process knowledge of oil treatment, gas treatment and heating
  • Report to leader routine spare part needed
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Senior Electrical Technician
Ref No:
 SET02
Location: Rivers State
Requirements

  • Ability to conduct preventive & corrective maintenance and repairs on electrical equipments.
  • Rectify fault on Rectifiers and UPS
  • Performs insulation resistance test on Transformer Oil to ascertain its breakdown voltage
  • Calibrates various types of protection Relays
  • Focus on maintenance activities to achieve optimum availability and reliability of electrical equipments.
  • Carry out preliminary investigation of equipment failures and ensure repair works are completed in safely and timely manner.
  • Execution of any electrical related works to ensure appropriate standard of all safety and environmental standards are achieved
  • Installs and rectifies fault on Motor Control Centre (MCC) Switch Gear accessories and maintain a full service record of all works undertaken on electrical equipments for CMMS input
  • Provides assistance to Electrical Supervisors in developing and implementing operational and functional of electrical related procedures to ensure operational efficiency of the system.
  • Participates in the diagnosis and repair of major equipment faults and breakdowns, compiles the field data for further technical evaluations
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Junior Electrician Technician
Ref No: 
JET03
Location: Rivers State
Requirements

  • Ability to conduct preventive & corrective maintenance and repairs on electrical equipments.
  • Rectify fault on Rectifiers and UPS
  • Performs insulation resistance test on Transformer Oil to ascertain its breakdown voltage
  • Calibrates various types of protection Relays
  • Focus on maintenance activities to achieve optimum availability and reliability of electrical equipments.
  • Carry out preliminary investigation of equipment failures and ensure repair works are completed in safely and timely manner.
  • Execution of any electrical related works to ensure appropriate standard of all safety and environmental standards are achieved
  • Installs and rectifies fault on Motor Control Centre (MCC) Switch Gear accessories and maintain a full service record of all works undertaken on electrical equipments for CMMS input
  • Provides assistance to Electrical Supervisors in developing and implementing operational and functional of electrical related procedures to ensure operational efficiency of the system.
  • Participates in the diagnosis and repair of major equipment faults and breakdowns, compiles the field data for further technical evaluations
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Junior Mechanical Technicians
Ref No: 
JMT03
Location: Rivers State
Requirements

  • Specialized in Rotary equipments: Engines / Turbines I Pumps / fans / gearbox/shaft and alignments
  • Understand Mechanical drawing
  • P&ID’s
  • Process knowledge of oil treatment, gas treatment and heating
  • Maintenance, installation of advanced rotating machinery such as pumps, compressors, cranes, turbines, essential generators
  • Carry out specifications, installation, inspections, testing and commissioning of new or changed mechanical equipment such as compressors, pumps, turbines in relation to laid down procedures and standards.
  • Ability to conduct preventive & corrective maintenance and repairs on mechanical equipments.
  • Troubleshooting, Repairs, diagnosis on different types of engines
  • Analyze and troubleshoot operations and maintenance related faults within systems, units and electro mechanical rotating equipments such as pumps (centrifugal, Positive displacement pumps compressors, valves, cranes and hoist etc.
  • Carry out valve repairs, installation and cleaning such as gate, ball, globe, butterfly, check, plug etc. valves used in the oil and gas industry.
  • Perform preventive maintenance on fire water systems pumps and drivers and other firefighting equipments.
  • Participate in design reviews, HAZID and HAZOP operations studies
  • Proficient in systems troubleshooting and live equipment performance monitoring and data recording
  • Working knowledge of all relevant engineering documentation and drawing, codes and specifications, standards and practice.
  • Review spares and keep repair records on all rotating equipments on board the platform
  • Develop and use SAP to maintain stock levels of spares required for the effective operations of equipments so as to minimize downtime and failures.
  • Repairs, overhaul, installation and technical expertise on hydraulic and pneumatic systems.
  • Perform preventive and corrective maintenance activities as generated by computerized Maintenance Management systems (CMMS) on the facility rotating equipment
  • Report to leader routine spare part needed
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Material Coordinator
Ref No:
 MC01
Location: Rivers State
Responsibilities

  • Ensure that company materials are received, inspected, handled and stored and ensure that their quality and value are preserved in accordance with the original specification, to meet operational requirements
  • Maintenance planning and scheduling of materials for personnel requirement.
  • Permit to Work (PTW) coordination and follow up
  • Update work order of material received on site on UN SUP. Inventory and backload of materials for reintegration into stock.
  • Use of computerized maintenance management system software; SAP (UNISUP) in material coordination for offshore projects and maintenance planning.
  • Design and develop tools management procedure and template, materials and personnel management procedures and procedure for technical reporting as application to offshore facilities maintenance services.
  • Prepare lists of materials and equipment requirements for the location and accordingly report to supervisors to ensure availability in due time.
  • Monitor materials and equipment stock and take on hand relevant procedures to make available sufficient stock.
  • Maintaining the materials system duly updated, auditable and with traceable records for material traceability and control.
  • Assist for daily, weekly and monthly report preparation

Requirements

  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Junior Material Officer (Logistic)
Location:
 Rivers State
Ref No: JMC02
Responsibilities

  • Ensure that company materials are received and dispatched to requested department for use
  • Ensure safe and proper offloading of shipment and placement in assigned storage location
  • Managing the flow of materials and supplies
  • Ensure materials (spares) required are available on site
  • Update of material tracking database for all materials received
  • Follow up on materials arriving site and the status of materials received
  • Assist Material Coordinator and Contract Site Representative (CSR) on Material coordination

Requirements

  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Instrument Foreman
Ref No: 
IF01
Location: Rivers State
Requirements

  • Ability to conduct preventive & corrective maintenance and repairs on instrumentation equipments
  • Loop diagrams – Applicants must be able to read and understand loop diagrams. This includes DCS to marshaling panel to instrument in field.
  • Wiring diagrams and logics
  • Perform equipment modification and new equipments installation using drawings, diagrams, OEM manuals and P&lD
  • Understand Analog outputs/inputs, cabling screens and signals
  • Understand Digital outputs/inputs, cabling and signals
  • Physical measurements: Ability to know the relationship between oC and Kelvin by temperature, Psi and BAR by pressure measurements
  • Process knowledge of oil treatment, gas treatment and heating
  • Good knowledge of Boilers/Heaters/lgniters and Pilots
  • Good knowledge of mechanical relation to valves.
  • Good knowledge of electronics related transmitters and control circuits
  • Calibration of instruments
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Senior Instrument Technician
Ref No:
 SIT02
Location: Rivers State
Requirements

  • Ability to conduct preventive & corrective maintenance and repairs on instrumentation equipments
  • Loop diagrams – Applicants must be able to read and understand loop diagrams. This includes DCS to marshaling panel to instrument in field.
  • Wiring diagrams and logics
  • Perform equipment modification and new equipments installation using drawings, diagrams, OEM manuals and P&lD
  • Understand Analog outputs/inputs, cabling screens and signals
  • Understand Digital outputs/inputs, cabling and signals
  • Physical measurements: Ability to know the relationship between oC and Kelvin by temperature, Psi and BAR by pressure measurements
  • Process knowledge of oil treatment, gas treatment and heating
  • Good knowledge of Boilers/Heaters/lgniters and Pilots
  • Good knowledge of mechanical relation to valves.
  • Good knowledge of electronics related transmitters and control circuits
  • Calibration of instruments
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Senior Instrument Engineer (Automatism PLC)
Ref No: 
SIT03
Location: Rivers State
Requirements

  • Ability to conduct preventive & corrective maintenance and repairs on instrumentation equipments
  • Loop diagrams – Applicants must be able to read and understand loop diagrams. This includes DCS to marshaling panel to instrument in field.
  • Wiring diagrams and logics
  • Perform equipment modification and new equipments installation using drawings, diagrams, OEM manuals and P&lD
  • Understand Analog outputs/inputs, cabling screens and signals
  • Understand Digital outputs/inputs, cabling and signals
  • Physical measurements: Ability to know the relationship between oC and Kelvin by temperature, Psi and BAR by pressure measurements
  • Process knowledge of oil treatment, gas treatment and heating
  • Good knowledge of Boilers/Heaters/lgniters and Pilots
  • Good knowledge of mechanical relation to valves.
  • Good knowledge of electronics related transmitters and control circuits
  • Calibration of instruments
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Junior Instrument Technicians
Ref No:
 JIT04
Location: Rivers State
Requirements

  • Ability to conduct preventive & corrective maintenance and repairs on instrumentation equipments
  • Loop diagrams – Applicants must be able to read and understand loop diagrams. This includes DCS to marshaling panel to instrument in field.
  • Wiring diagrams and logics
  • Perform equipment modification and new equipments installation using drawings, diagrams, OEM manuals and P&lD
  • Understand Analog outputs/inputs, cabling screens and signals
  • Understand Digital outputs/inputs, cabling and signals
  • Physical measurements: Ability to know the relationship between oC and Kelvin by temperature, Psi and BAR by pressure measurements
  • Process knowledge of oil treatment, gas treatment and heating
  • Good knowledge of Boilers/Heaters/lgniters and Pilots
  • Good knowledge of mechanical relation to valves.
  • Good knowledge of electronics related transmitters and control circuits
  • Calibration of instruments
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Mechanical Foreman
Ref No: 
MF01
Location: Rivers State
Requirements

  • Specialized in Rotary equipments: Engines / Turbines I Pumps / fans / gearbox/shaft and alignments
  • Understand Mechanical drawing
  • P&ID’s
  • Process knowledge of oil treatment, gas treatment and heating
  • Maintenance, installation of advanced rotating machinery such as pumps, compressors, cranes, turbines, essential generators
  • Carry out specifications, installation, inspections, testing and commissioning of new or changed mechanical equipment such as compressors, pumps, turbines in relation to laid down procedures and standards.
  • Ability to conduct preventive & corrective maintenance and repairs on mechanical equipments.
  • Troubleshooting, Repairs, diagnosis on different types of engines
  • Analyze and troubleshoot operations and maintenance related faults within systems, units and electro mechanical rotating equipments such as pumps (centrifugal, Positive displacement pumps compressors, valves, cranes and hoist etc.
  • Carry out valve repairs, installation and cleaning such as gate, ball, globe, butterfly, check, plug etc. valves used in the oil and gas industry.
  • Perform preventive maintenance on fire water systems pumps and drivers and other firefighting equipments.
  • Participate in design reviews, HAZID and HAZOP operations studies
  • Proficient in systems troubleshooting and live equipment performance monitoring and data recording
  • Working knowledge of all relevant engineering documentation and drawing, codes and specifications, standards and practice.
  • Review spares and keep repair records on all rotating equipments on board the platform
  • Develop and use SAP to maintain stock levels of spares required for the effective operations of equipments so as to minimize downtime and failures.
  • Repairs, overhaul, installation and technical expertise on hydraulic and pneumatic systems.
  • Perform preventive and corrective maintenance activities as generated by computerized Maintenance Management systems (CMMS) on the facility rotating equipment
  • Report to leader routine spare part needed
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Job Title: Senior Mechanical Technicians
Ref No: 
SMT02
Location: Rivers State
Requirements

  • Specialized in Rotary equipments: Engines / Turbines I Pumps / fans / gearbox/shaft and alignments
  • Understand Mechanical drawing
  • P&ID’s
  • Process knowledge of oil treatment, gas treatment and heating
  • Maintenance, installation of advanced rotating machinery such as pumps, compressors, cranes, turbines, essential generators
  • Carry out specifications, installation, inspections, testing and commissioning of new or changed mechanical equipment such as compressors, pumps, turbines in relation to laid down procedures and standards.
  • Ability to conduct preventive & corrective maintenance and repairs on mechanical equipments.
  • Troubleshooting, Repairs, diagnosis on different types of engines
  • Analyze and troubleshoot operations and maintenance related faults within systems, units and electro mechanical rotating equipments such as pumps (centrifugal, Positive displacement pumps compressors, valves, cranes and hoist etc.
  • Carry out valve repairs, installation and cleaning such as gate, ball, globe, butterfly, check, plug etc. valves used in the oil and gas industry.
  • Perform preventive maintenance on fire water systems pumps and drivers and other firefighting equipments.
  • Participate in design reviews, HAZID and HAZOP operations studies
  • Proficient in systems troubleshooting and live equipment performance monitoring and data recording
  • Working knowledge of all relevant engineering documentation and drawing, codes and specifications, standards and practice.
  • Review spares and keep repair records on all rotating equipments on board the platform
  • Develop and use SAP to maintain stock levels of spares required for the effective operations of equipments so as to minimize downtime and failures.
  • Repairs, overhaul, installation and technical expertise on hydraulic and pneumatic systems.
  • Perform preventive and corrective maintenance activities as generated by computerized Maintenance Management systems (CMMS) on the facility rotating equipment
  • Report to leader routine spare part needed
  • Minimum of OND
  • A minimum of 10 years experience in a similar position in oil and gas related industries.
  • Must be conversant with the necessary tools as it relates to any of applicants’ areas of specialization as mentioned above
  • An ability to work with minimum supervision.
  • Must produce an evidence of past experience in the same industries.
  • Must possess the necessary qualifications

Method Of Application 
Interested and qualified candidates should send their CVs, using above reference numbers (in relation to field of specialty) as subject to: info-ND@dietsmann.com or
P.O.Box 5018,
Port Harcourt, Rivers State

Application Deadline 8th January, 2013

Leave a Reply

Your email address will not be published. Required fields are marked *